PJ5000U-KLC
Upon request
COD. PJ5000U-KLC
Power: 5.000W
5.000W Compact liquid cooled amplifier.
FEATURES
PRIMARY APPLICATION: It is particularly suitable for dusty environments, due to air that not turns inside it, so it remains much cleaner and allowing to reduced maintenance and ambiental noise.
OPERATING EFFICIENCY: incorporate a PFC (Power Factor Corrector) power supply, that provides the utmost efficiency for enhanced energy saving and environmental protection, which added to LD-MOSFET technology ensure high efficiency, better than 70% across the bandwidth.
AMPLIFIER FEATURES: exceptional-gain amplifier with very low input drive power requirement and adjustable power output from 10 to 100 %. Available (optionally) LD “Low Drive” technology which reduces required input drive power to as little as 5W.
HARDWARE FEATURES: cooled via a non-toxic, non-corrosive liquid that can withstand temperatures under -30°C. The cooling system features a double pump, with switching and automatic diagnostics. Designed in only 4 rack units.
USER-FRIENDLY FEATURES: configurable in single or three phase.
EASE OF MAINTENANCE: provides the pump compartment on the removable carriage with special gate valves that prevent the need to empty out the liquid present in the unit.
RELIABILITY/CONTINUITY: APC (Automatic Power Control), Foldback protection, redundancy of amplification units and redudancy of power supply units to mantene always on the broadcast transmission, ensure reliable operation under any operating conditions. The cooling system with the circuit of the liquid at low pressure and tubes of the circuit sized to withstand pressures 10 times over that of the operating pressures, are evidence of a high level of reliability.
INTERFACE CONTROL: control due to microprocessor easily programmed from menu with all key parameters displayed on LCD.
REMOTE CONTROL: electromechanically controllable and integrable into all digital RVR telemetry systems.
PRIMARY APPLICATION: It is particularly suitable for dusty environments, due to air that not turns inside it, so it remains much cleaner and allowing to reduced maintenance and ambiental noise.
OPERATING EFFICIENCY: incorporate a PFC (Power Factor Corrector) power supply, that provides the utmost efficiency for enhanced energy saving and environmental protection, which added to LD-MOSFET technology ensure high efficiency, better than 70% across the bandwidth.
AMPLIFIER FEATURES: exceptional-gain amplifier with very low input drive power requirement and adjustable power output from 10 to 100 %. Available (optionally) LD “Low Drive” technology which reduces required input drive power to as little as 5W.
HARDWARE FEATURES: cooled via a non-toxic, non-corrosive liquid that can withstand temperatures under -30°C. The cooling system features a double pump, with switching and automatic diagnostics. Designed in only 4 rack units.
USER-FRIENDLY FEATURES: configurable in single or three phase.
EASE OF MAINTENANCE: provides the pump compartment on the removable carriage with special gate valves that prevent the need to empty out the liquid present in the unit.
RELIABILITY/CONTINUITY: APC (Automatic Power Control), Foldback protection, redundancy of amplification units and redudancy of power supply units to mantene always on the broadcast transmission, ensure reliable operation under any operating conditions. The cooling system with the circuit of the liquid at low pressure and tubes of the circuit sized to withstand pressures 10 times over that of the operating pressures, are evidence of a high level of reliability.
INTERFACE CONTROL: control due to microprocessor easily programmed from menu with all key parameters displayed on LCD.
REMOTE CONTROL: electromechanically controllable and integrable into all digital RVR telemetry systems.
| PJ5000U-KLC | ||||
| Parameters | Conditions | U.M. | Value | Notes |
| GENERALS | ||||
| Frequency range | MHz | 87.5 ÷ 108 | ||
| Rated output power | W | 5000 | ||
| Spurious & harmonic suppression | dBc | < -75 (-80 typical) | Meets or exceeds all FCC and CCIR rules | |
| Working temperature | °C | -5 to +50 | ||
| Working humidity | % | 95 | Without condensing | |
| Working altitude | mt | Up to 3000 * | * With adequate air evacuation system in site | |
| POWER REQUIREMENTS | ||||
| Power supply type | monophase / biphase | Internal wiring | ||
| AC Power input | AC Supply Voltage | VAC | 230 +10% -15% | 400 +10% -15% | Monophase | Threephases Y |
| AC Apparent Power Consumption | VA | 7366 | Measured on threephases 400V | |
| Active Power Consumption | W | 7352 | Measured on threephases 400V | |
| Overall Efficiency | % | Typical 68 | Measured on threephases 400V | |
| Power factor | 0,998 | Measured on threephases 400V | ||
| Connector | ILME CQ 4/2 | |||
| MECHANICAL DIMENSIONS | ||||
| Phisical dimensions | Front panel width | mm / inch | 483 / 19 | EIA rack |
| Front panel height | mm | 177 | 4HE | |
| Overall depth | mm | 700 | ||
| Chassis depth | mm | 655 | ||
| Weight | kg | About 41 | 21 PS+34 RF | |
| Cooling type | Liquid with external unit | |||
| Acoustic noise | dBA |
