FEATURES

HARDWARE FEATURES: Maximum modularity and scalability of the system from economical compositions “single exciter” to redundant custom compositions “double exciter”.

POWER & QUALITY:With the family of RVR’s liquid transmitters based on the U-KLC series, is possible to realize compact equipments up to 20kW, with high energy savings thanks to the use of high efficiency pumps and no forcing ventilation. The Cooling system is with low pressure circuit and double pump in automatic switching and diagnostics.

RELIABILITY & REDUNDANCY (business continuity): Extremely safe operation: by pressing the emergency button is cutting the power supply line to the various relay switches while remaining exciters operational.

USER-FRIENDLY FEATURES:user-friendly software and a simple, intuitive HM interface let you easily set up and control all machine operating parameters. user-friendly software and a simple, intuitive HM interface let you easily set up and control all machine operating parameters.

EASE OF MAINTENANCE:accessibility and ease of maintenance are ensured by advanced modular engineering concepts incorporated in the transmitter and by its lightweight components. Better cleaner work environment and low environmental noise.

REMOTE CONTROL:the device comes with a powerful, complete telemetry system.

TX30KSS/60D216J
Parameter	Value
GENERALS
RF Output Power	30 kW
Frequency Range	87,5 – 108 MHz programmable in 1,10 or 1000 KHz steps
Frequency Stability	±1 ppm
Nominal Frequency Deviation	±75 KHz (peak)
Maximum Frequency Deviation	±100 KHz (peak)
Class of Emission	180KF8E
Stereo Transmission	Acc. To ITU-R / Rec. 450 (Pilot tone)
RF Output Impedance	50 Ω, Unbalanced
RF Output Connector	3-1/8” EIA Flange
VSWR	1.41:1 with automatic fold-back at higher VSWR
Frequency Control	Synthesizer µ processor control
Modulation Capability	±150 KHz
Modulation Mode	Mono, Stereo, Multiplex, SCA, RDS, DARC, Aux
Pre-emphasis Mode	0/50 (CCIR) µs, 75 (FCC) µs
Asynchronous AM S/N Ratio	≥ 70 dB unweight, referred to 100% AM modulation at 400 Hz Pre-emphasis and without FM modulation
Synchronous AM S/N Ratio	≥ 55 dB, reference to 100% AM modulation at 400 Hz, 50 µs Pre-emphasis with FM modulation at 75 KHz of deviation
Harmonics suppression and Spurious	Typically 85dB
Overall efficiency	Typically 70/72%
RF Harmonics	Exceeds ETSI/CCIR/FCC requirements
RF Spurious	Exceeds ETSI/CCIR/FCC requirements
Max Frequency Tolerance	As per ITU (R)
Analogue Input Level ±75 Khz (peak) deviation	-6 dBu - +6 dBu at 1 Khz, 0 dBu
Digital Input Level ±75 Khz (peak) deviation	-20.0 dBFS – 0 dBFS (adjustable) at 1 Khz
MONO OPERATION
S/N ratio	> 90dB (typical 92dB), 75KHz deviation (30 Hz to 15 KHz base band) rms, unweighted
Total Harmonic Distortion + Noise	Better than 0.15%
Inter Modulation Distortion SMPTE	Better than 0,20% (60 Hz / 7 KHz, 4:1, +4
Frequency Response	±0,2dB (30Hz – 15Khz)
Audio Input Impedance	600 Ω balanced or 10 kΩ unbalanced
MPX OPERATION
S/N ratio	>90 dB, 75 KHz deviation rmd, unweight
Total Harmonic Distortion + Noise	< 0,02%
Inter Modulation Distortion	< 0,02% 60 Hz / 7 KHz, 4:1, +4dBu
Frequency Response	±0,3dB, 30 Hz to 100 KHz
Transient Intermodulation Distortion	0,03%, 2,96 KHz square wav end 14 KHzsine wave
STEREO OPERATION
Audio Input Impedance	2 K ohm or more
Stereo FM S/N Ratio, unweighted	>84 dB, 30 Hz to 15 KHz deviation (L or R), rms
Stereo Separation (Sine Wave)	≥ 60 dB (30 Hz – 15 KHz)
Linear Cross Talk	Better than 50 dB, referred to 100% modulation (30 Hz to 15 KHz)
Non-linear Cross Talk	Better than 50 dB, referred to 100% modulation
Total Harmonic Distortion + Noise (L or R)

The image of this layout is purely demonstrative and may change without notice. The configuration is only referred to installed equipment; rack, cover panels and all others accessories are to be defined at order.