TX10KSS
COD. TX10KSS/62D084B
Potencia: 10.000W
10.000W Modular system.
FEATURES
The image of this layout is purely demonstrative and may change without notice. The configuration is only referred to installed equipment; rack, cover panels and all others accessories are to be defined at order.
- Tunable over entire FM band ( 87.5 – 108 MHZ ) without tuning.
- Available in multiple configurations from 2KW to 14KW.
- Amplifier's units from 1.000W to 3.500W.
- Exciter's BLUES, TEX, PTX Series depending on client's requirements and budget.
- Overall efficiency better than 70%.
- Remotely controllable by telemetry system.
- Design for 24/7 non-stop operation.
- N+1 Configuration available.
- Compliance to IEC safety standards.
- Compliance with EC – CCIR – FCC standards.
TX10KSS/62D084B | |
Parameter | Value |
GENERALS | |
RF Output Power | 10 kW |
Frequency Range | 87,5 – 108 MHz |
Frequency Stability | > 1 ppm |
Frequency programmability | By software, with 1, 10, 100 , 1000 kHz steps |
Nominal Frequency Deviation | ±75 KHz (peak) |
Maximum Frequency Deviation | ±150 KHz (peak) |
Class of Emission | 180KF8E Direct to Channel |
Modulation Mode | Mono, Stereo, Multiplex, SCA, RDS, Aux |
Stereo transmissions | Acc. to ITU-R / Rec. 450 (Pilot tone) |
RF Output Impedance | 50 Ω, Unbalanced |
RF Output Connector | 1-5/8” EIA Flange |
VSWR | 1.4:1 with automatic fold-back at higher VSWR |
Pre-emphasis Mode | 0/50 (CCIR) µs,75 (FCC) μs |
Asynchronous AM S/N Ratio | Typically >70dB |
Synchronous AM S/N Ratio | Typically > 55dB |
Harmonics suppression and Spurious | Typically < 85dB |
Overall efficiency | Typically > 70% |
RF Harmonics | Exceeds ETSI/CCIR/FCC requirements |
RF Spurious | Exceeds ETSI/CCIR/FCC requirements |
Analogue Input level {+75 Khz (peak) deviation } | -12,5 dBu - +12,5 dBu (adjustable) |
Digital Input level {+75 Khz (peak) deviation } | -20,0 dBFS – 0 dBFS (adjustable) |
MONO OPERATION | |
S/N ratio | Typically > 83dB |
Total Harmonic Distortion + Noise | Typically < 0,03% |
Inter Modulation Distortion SMPTE | Typically < 0,02% |
Frequency Response | Typically ±0,2dB |
Audio Input Impedance | 600 Ω or 10 kΩ |
MPX OPERATION | |
Composite S/N ratio | Typically > 80dB |
Total Harmonic Distortion + Noise | Typically < 0,05% |
Inter Modulation Distortion | Typically < 0,05% |
Frequency Response | Typically ±0,2dB |
Audio Input Impedance | 10 kΩ |
STEREO OPERATION | |
Stereo FM S/N Ratio | Typically > 83dB |
Total Harmonic Distortion + Noise (L or R) | Typically < 0,02% |
Inter Modulation Distortion SMPTE (L or R) | Typically < 0,02% |
Frequency response (L or R) | Typically ±0,2dB |
Linear Cross Talk | Typically > 50dB |
Non-linear Cross Talk | Typically > 50dB |
Stereo Separation (Sine Wave) | Typically > 70dB |
Audio Input Impedance | 600 Ω or 10 kΩ |
Digital Input Impedance | 110 Ω |
The image of this layout is purely demonstrative and may change without notice. The configuration is only referred to installed equipment; rack, cover panels and all others accessories are to be defined at order.