PTX100DDS
COD. PTX100DDS
Puissance: 100W
100W Compact DDS stereo transmitter.
FEATURES
PTXDDS is the ultimate digital evolution of the most sold professional FM transmitter world-wide!
AUDIO PERFORMANCE: clear and transparent sound comparable to CD sound quality made possibile thanks to a noise/signal ratio as high as 90dB, low distortion and stereo separation as high as 70dB!
PRIMARY APPLICATION: optimal for use as an independent exciter. Adjustable power output from 0 to 100%.
AUDIO FEATURE: incorporated a board with DSP for isofrequency applications (SFN) and a limiter on audio (ITU) to ensure controlled emissions in the spectrum, created COMPLETELY DIGITAL and free from mechanical disturbances.
AUDIO RESCUER: integrated, the established timing and priority of all audio inputs (Analog-Digital-MPX) are programmable.
INTERFACE CONTROL: totally microprocessor-controlled, easily programmed from menu through a large LCD and useful optical ENCODER.
INPUT/OUTPUT INTERFACE: built-in high-performance stereo coder, L&R analogue audio inputs, Mono inputs, MPX composite signal and auxiliary inputs for SCA / RDS signals. S/PDIF, TOSLINK, AES/EBU digital audio inputs are available as standard.
REMOTE CONTROL: built-in telemetry system via GSM modem, battery and battery charger or via WEB or via SNMP (option).
RELIABILITY/CONTINUITY: business continuity is guaranteed by an incredible range and variety of controls, such as Fold-Back control for effective VSRW (Voltage Standing Wave Ratio) protection and IAMLC (Intelligent Automatic Modulation Level Control) to keep modulation level steady.
RDS APPLICATION: built-in digital RDS encoder with UECP standard functions.
EASE OF MAINTENANCE: advanced module engineering ensures extreme of access and simple maintenance.
REGULATORY COMPLIANCE: state-of-the-art technology in full compliance with EC, FCC and CCIR standards.
The image of this layout is purely demonstrative and may change without notice.
PTXDDS is the ultimate digital evolution of the most sold professional FM transmitter world-wide!
AUDIO PERFORMANCE: clear and transparent sound comparable to CD sound quality made possibile thanks to a noise/signal ratio as high as 90dB, low distortion and stereo separation as high as 70dB!
PRIMARY APPLICATION: optimal for use as an independent exciter. Adjustable power output from 0 to 100%.
AUDIO FEATURE: incorporated a board with DSP for isofrequency applications (SFN) and a limiter on audio (ITU) to ensure controlled emissions in the spectrum, created COMPLETELY DIGITAL and free from mechanical disturbances.
AUDIO RESCUER: integrated, the established timing and priority of all audio inputs (Analog-Digital-MPX) are programmable.
INTERFACE CONTROL: totally microprocessor-controlled, easily programmed from menu through a large LCD and useful optical ENCODER.
INPUT/OUTPUT INTERFACE: built-in high-performance stereo coder, L&R analogue audio inputs, Mono inputs, MPX composite signal and auxiliary inputs for SCA / RDS signals. S/PDIF, TOSLINK, AES/EBU digital audio inputs are available as standard.
REMOTE CONTROL: built-in telemetry system via GSM modem, battery and battery charger or via WEB or via SNMP (option).
RELIABILITY/CONTINUITY: business continuity is guaranteed by an incredible range and variety of controls, such as Fold-Back control for effective VSRW (Voltage Standing Wave Ratio) protection and IAMLC (Intelligent Automatic Modulation Level Control) to keep modulation level steady.
RDS APPLICATION: built-in digital RDS encoder with UECP standard functions.
EASE OF MAINTENANCE: advanced module engineering ensures extreme of access and simple maintenance.
REGULATORY COMPLIANCE: state-of-the-art technology in full compliance with EC, FCC and CCIR standards.
| PTX100DDS | ||||
| Parameters | U.M. | Value | Notes | |
| GENERALS | ||||
| Frequency range | MHz | 87.5 ÷ 108 | ||
| Rated output power | W | 100 | Continuously adjustable from 10 to 100% | |
| Modulation type | Direct Digital Synthesis | |||
| Operational mode | Mono, Stereo, MPX | |||
| Working temperature | °C | -5 to +50 | ||
| Working humidity | % | 95 | Without condensing | |
| Working altitude | mt | Up to 3000 * | * With adequate air evacuation system in site | |
| Frequency setting | kHz | 1, 10, 100 , 1000 | Steps | |
| Frequency stability | Temperature range from -5°C to 50°C | ppm | ±1 | |
| Modulation capability | Refered @ 0dBu for 75kHz | kHz | 150 | Meets or exceeds all FCC and CCIR rules |
| Pre-emphasis | µs | 0, 50 (CCIR), 75 (FCC) | Selectable | |
| POWER REQUIREMENTS | ||||
| AC Power input | AC Supply Voltage | VAC | 115 / 230 ±15% | Internal switch |
| AC Apparent Power Consumption | VA | 410 | ||
| Active Power Consumption | W | 250 | ||
| Power Factor | 0,6 | |||
| Overall Efficiency | % | Typical 40 | ||
| Connector | VDE IEC Standard | |||
| MECHANICAL DIMENSIONS | ||||
| Phisical dimensions | Front panel width | mm / inch | 483 / 19 | EIA rack |
| Front panel height | mm / inch | 88 / 3 1/2 | 2HE | |
| Overall depth | mm | 400 | ||
| Chassis depth | mm | 389 | ||
| Weight | kg | Approx. 10 | ||
| Cooling | Forced, with internal fan | |||
| Acoustic noise | dBA | < 56 | ||
| AUDIO INPUTS | ||||
| Left | Connector | XLR F | ||
| Type | Balanced | |||
| Impedance | Ohm | 10 k or 600 | ||
| Input Level, Adjustment Range | dBu | -12.5 to +12.5 | 0.1 dB step adjustable | |
| Right | Connector | XLR F | ||
| Type | Balanced | |||
| Impedance | 10 k or 600 | |||
| Input Level, Adjustment Range | -12.5 to +12.5 | 0.1 dB step adjustable | ||
| MPX | Connector | BNC | ||
| Type | Unbalanced | |||
| Impedance | Ohm | 10 k | ||
| Input Level, Adjustment Range | dB | -12.5 to +12.5 | 0.1 dB step adjustable | |
| SCA/RDS | Connector | 2 x BNC | ||
| Type | Unbalanced | |||
| Impedance | Ohm | 10 k | ||
| Input Level, Adjustment Range | dBu | -17 to -40 | 0.5 dB step adjustable | |
| AES/EBU (option) | Connector | XLR F | ||
| Type | Balanced | |||
| Impedance | Ohm | 110 | ||
| TOS/Link (option) | Connector | TOSLINK | ||
| Type | Optical | |||
| OUTPUTS | ||||
| RF Output | Connector | N type | ||
| Impedance | Ohm | 50 | ||
| RF Monitor | Connector | BNC | ||
| Impedance | Ohm | 50 | ||
| Output Level | dB | Approx. -40 | ||
| Pilot output | Connector | BNC | ||
| Impedance | Ohm | >600 | ||
| Output Level | Vpp | 2.2 | Sinusoidal | |
| Output Level, Adjustment Range | dBu | -12.5 to +5; | or -6.5 to +11; | or -0.5 to 17 | 0.1 dB step adjustable; | internal jumper to increase the output level of +6dBu; | internal jumper to increase the output level of +12dBu; | |
| MPX Monitor | Connector | BNC | ||
| Impedance | Ohm | >600 | ||
| Output Level Adjustment Range | dBu | -12.5 to +5; | or -6.5 to +11; | or -0.5 to 17 | 0.1 dB step adjustable, @ ±75 kHz peak FM; | internally adjustable +6dBu by jumper; | internally adjustable +12dBu by jumper; | |
| FUSES | ||||
| On mains | 1 External fuse F 6,3 AT - 5x20 mm | |||
| On services | X | |||
| On PA Supply | X | |||
| On driver supply | X |
The image of this layout is purely demonstrative and may change without notice.
